Laser protection system for the US and Canadian market: $1,199 MSRP for the LP3 kit
The GENEVO LP is a laser protection system (laser jammer) designed for the US and Canadian market. The GENEVO LP3 kit has an MSRP of $1,199 and includes a control unit and 3 laser sensors with extension cables. The system supports up to 6 sensors. It works on its own with the GENEVO LP control panel or with a GENEVO PRO II or PRO II DUO radar detector. The LP3 MSRP is the same for both installations. GENEVO developed its firmware for the DragonEye lidar guns used by US police. Authorized GENEVO dealers install the system. Laser jammers are illegal in a number of US states and in parts of Canada. Check the law where you drive before you buy.
Last updated: October 10, 2026
| Type | Laser protection system (laser jammer) with front and rear laser sensors |
|---|---|
| MSRP | $1,199 for GENEVO LP3: control unit and 3 laser sensors with extension cables |
| Additional sensors | GENEVO LP1 (1 laser sensor with an extension cable), available through GENEVO dealers; up to 6 sensors in total |
| Where to buy | Through authorized GENEVO dealers, who install the system |
| Warranty | 3 years when a certified GENEVO dealer installs and registers it |
| Laser sensors | Up to 6, at the front and the rear of the car |
| Works with | GENEVO PRO II, GENEVO PRO II DUO, or on its own with the GENEVO LP control panel; $1,199 MSRP for the LP3 kit in either setup |
| Police lidar | Firmware developed for the DragonEye lidar guns used by US police |
| Protection time | Detect only, 0–9 seconds or Unlimited in the GENEVO PRO II menu; 1–9 seconds or Unlimited in the standalone PC settings |
| Wavelength | 905 nm, Class 1 laser product (IEC 60825-1) |
| Updates | Free firmware updates over a USB flash drive from a Windows PC or a Mac |
Laser jammers are illegal in at least California, Colorado, Illinois, Minnesota, Nebraska, Oklahoma, South Carolina, Tennessee, Texas, Utah, Virginia and Washington, D.C., and the list may not be complete. In Canada, Ontario's Highway Traffic Act bans devices that interfere with police speed measurement, and other provinces have their own rules. Check the current law in every state or province where you drive before you install a GENEVO LP; a laser jammer does not make speeding legal.
The GENEVO LP3 works without a radar detector. It uses the GENEVO LP control panel, a cable harness with a capacitive button, buzzer and LED. The button controls power, volume and alerts. Settings are saved on a PC in a configuration file on the GENEVO LP USB flash drive.
| Turn on | Turns on automatically when power is supplied. A chime sounds and the LED flashes twice. |
|---|---|
| Turn off and restart | Hold the button for 3 seconds to turn the LP off. A short press turns it back on. |
| Volume | Press the button while the system is idle to cycle through Low, Medium and High. |
| During a laser alert | A short press stops protection while laser detection continues. A second press stops detection too. |
| Cooldown | A 30-second cooldown starts after detection ends. The “Starting Sequence” then confirms that protection is active again. |
| PC settings | Volume: 1–3. LED brightness: 1–5. LED after startup: stays on or turns off. Protection time: 1–9 seconds or Unlimited. Save the configuration file on the LP USB flash drive, then insert the drive into the control unit to apply the settings. |
The GENEVO LP connects to the control unit of the GENEVO PRO II or PRO II DUO, and its alerts appear on the PRO II's color OLED control panel. The PRO II already detects police laser (904 nm) passively with an IR sensor in its HDM+ antenna; the LP adds active protection with up to 6 sensors. All LP settings are made in the PRO II menu.
| PRO II setting | Options | What it does |
|---|---|---|
| Laser detection | On or Off | Turns laser alerts on and opens the laser accessory settings |
| Laser protection | LP or Off | Selects the GENEVO LP as the connected laser system |
| Protection | Off, Detect only, 0–9 seconds or Unlimited | How long the LP protects after a laser alert; Detect only warns without protection |
| Laser name | Off, No voice or Voice | Shows the name of the laser gun detected by the LP on the PRO II display. With Voice selected, the PRO II also announces the name, such as “DragonEye”. |
Only installation centers trained by GENEVO install the GENEVO LP, so you buy it through an authorized GENEVO dealer. The laser sensors go into the front grille, above the bumper or at the rear of the car, in a horizontal position with a clear view forward or backward; the control unit sits inside the cabin, away from water.
| Laser sensors | Waterproof design, 2 bracket types for tight spaces; front grille, above the bumper or at the rear |
|---|---|
| Control unit | Inside the cabin, under the dashboard or near the PRO II control unit; must stay dry. For standalone installations, the GENEVO LP control panel connects to this unit. |
| Cables | Sensor cable 3.3 ft (1 m), control unit cable 13 ft (4 m); extension cables available |
| Operating voltage | 10–16 V DC (12 V vehicle systems) |
|---|---|
| Power consumption | 11 W; 3 A fuse |
| Operating temperature | -4 °F to +176 °F (-20 °C to +80 °C) |
| Control unit | 6.5 × 3.5 × 1.0 in (166 × 88 × 26 mm) |
| Laser sensor | 2.1 × 0.6 × 1.5 in (53 × 15 × 37 mm) |
| Laser safety | Class 1 laser product (IEC 60825-1); complies with FDA performance standards for laser products, 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50 |
| Certifications | UN ECE Regulation No. 10 type approval |
The GENEVO LP updates from the included USB flash drive. Insert the drive into the control unit for 10 seconds to read the serial number, download the update at genevoupdate.com on a Windows PC or a Mac, copy it to the drive and insert it again. The GENEVO LP control panel confirms the update in a standalone installation. When connected to a PRO II, the PRO II control panel confirms it. Firmware updates are free; the steps are in the user manual.
Sources: GENEVO LP US user manual (version 2026-01-03), GENEVO America. Questions: support.us@genevo.com or +1 (844) 436-3861.
GENEVO Sales
Tel.: +1 (844) 436 3861
E-mail: sales.us@genevo.com
Mon - Fri: 08:00 - 20:00